We offer to supply following grades of metal scrap:
| Copper #2 / Birch Cliff | A combination of No. 2 copper wire and unalloyed copper scrap having a nominal 96% copper content (minimum 94%) as determined by electrolytic assay. Should be free of the following: Excessively leaded, tinned, soldered copper scrap; brasses and bronzes; excessive oil content, iron and non-metallics; copper tubing with other than copper connections or with sediment; copper wire from burning; insulation; hair wire; brittle burnt wire; and should be reasonably free of ash. |
| Stainless Steel Scrap 316 | C (0%-0.08%), Mn (0%-2.0%), Si (0%-0.75%), P (0%-0.045%), S (0%-0.03%), Cr (16%-18%), Mo (2%-3%), Ni (9.5%-14%). |
| Stainless Steel Scrap 304 | C (0%-0.07%), Mn (0%-2.0%), Si (0%-0.75%), P (0%-0.045%), S (0%-0.03%), Cr (17.5%-19.5%), Ni (8%-10.5%). |
| Aluminum Old Sheet Scrap / Taint Tabor | Clean old alloy aluminum sheet of two or more alloys, free of foil, venetian blinds, castings, hair wire, screen wire, food or beverage containers, radiator shells, airplane sheet, bottle caps, plastic, dirt, and other non-metallic items. Oil and grease not to total more than 1%. |
| Aluminum 6xxx Extrusions | One or more alloys (typically 6063 and 6061). Material may contain “butt ends” from the extrusion process but must be free of any foreign contamination. Anodized material is acceptable. Painted material or alloys other than 6063 must be agreed upon by buyer and seller. |
| Aluminum Zorba | Combination of the nonferrous metals: aluminum, copper, lead, magnesium, stainless steel, nickel, tin, and zinc, in elemental or alloyed (solid) form. The percentage of each metal within the nonferrous concentrate shall be subject to agreement between buyer and seller. |